Home > Tooling Products > Turret Blocks > Doosan/Daewoo
Sort By:
Page of 2
111769-Turret Block, Doosan/Daewoo 350/400/450
111769-Turret Block, Doosan/Daewoo 350/400/450
• Doosan/Daewoo Puma 350/400/450 CNC Lathe
• 2" Bore Diameter
• 7" OAL
• Front Drop Ledge: 1.625"
• Back Drop Ledge: 0.4 x .625" tall
• M12 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
111864-Turret Block, Doosan/Daewoo Puma 300
111864-Turret Block, Doosan/Daewoo Puma 300
• Doosan/Daewoo Puma 300C CNC Lathe
• 2.5" Bore Diameter
• 6" OAL
• Front Drop Ledge: 1.85"
• Back Drop Ledge: 0.4 x .625" tall
• 3/8"-16 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
111895-Turret Block, Doosan/Daewoo 700/800
111895-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 2.5" Bore Diameter
• 9" OAL
• Front Drop Ledge: 1.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
111901-Turret Block, Doosan/Daewoo 700/800
111901-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 2" Bore Diameter
• 9" OAL
• Front Drop Ledge: 1.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
111919-Turret Block, Doosan/Daewoo 350/400/450
111919-Turret Block, Doosan/Daewoo 350/400/450
• Doosan/Daewoo Puma 350/400/450 CNC Lathe
• 3" Bore Diameter
• 9" OAL
• Front Drop Ledge: 3.625"
• Back Drop Ledge: 0.4 x .625" tall
• 1/2-13 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112041-Turret Block, Doosan/Daewoo 350/400/450
112041-Turret Block, Doosan/Daewoo 350/400/450
• Doosan/Daewoo Puma 350/400/450 CNC Lathe
• 3" Bore Diameter
• 7" OAL
• Front Drop Ledge: 1.625"
• Back Drop Ledge: 0.4 x .625" tall
• M12 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112055-Turret Block, Doosan/Daewoo 700/800
112055-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 3" Bore Diameter
• 9" OAL
• Front Drop Ledge: 1.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
112101-Turret Block, Doosan/Daewoo 700/800
112101-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 4" Bore Diameter
• 9" OAL
• Front Drop Ledge: 1.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
112118-Turret Block, Doosan/Daewoo 350/400/450
112118-Turret Block, Doosan/Daewoo 350/400/450
• Doosan/Daewoo Puma 350/400/450 CNC Lathe
• 2.5" Bore Diameter
• 7" OAL
• Front Drop Ledge: 1.625"
• Back Drop Ledge: 0.4 x .625" tall
• M12 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112139-Turret Block, Doosan/Daewoo 700/800
112139-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 100mm (3.937") Bore Diameter
• 9" OAL
• Front Drop Ledge: 1.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
112161-Turret Block, Doosan/Daewoo Puma 300
112161-Turret Block, Doosan/Daewoo Puma 300
• Doosan/Daewoo Puma 300C CNC Lathe
• 2" Bore Diameter
• 6" OAL
• Front Drop Ledge: 1.85"
• Back Drop Ledge: 0.5 x .625" tall
• 3/8"-16 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112258-Turret Block, Doosan/Daewoo Puma 300
112258-Turret Block, Doosan/Daewoo Puma 300
• Doosan/Daewoo Puma 300C CNC Lathe
• 2.5" Bore Diameter
• 7" OAL
• Front Drop Ledge: 2.6"
• Back Drop Ledge: 0.4 x .625" tall
• 3/8"-16 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112280-Turret Block T-Slot, Doosan/Daewoo Puma 300MC
112280-Turret Block T-Slot, Doosan/Daewoo Puma 300MC
• Doosan/Daewoo Puma 300CM CNC Lathe
• 2" Bore Diameter
• 6" OAL
• Front Drop Ledge: 1"
• 1 Piece Split Design
• Thru Coolant Feature

Qty Add
112344-Turret Block, Doosan/Daewoo Lynx 220/240
112344-Turret Block, Doosan/Daewoo Lynx 220/240
• Doosan/Daewoo Lynx 220/240 CNC Lathe
• 1.5" Bore Diameter
• 4.5" OAL
• Front Drop Ledge: 0.95"
• Back Drop Ledge: 0.4 x .625" tall
• 3/8"-16 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112345-Turret Block, Doosan/Daewoo Lynx 220/240
112345-Turret Block, Doosan/Daewoo Lynx 220/240
• Doosan/Daewoo Lynx 220/240 CNC Lathe
• 2" Bore Diameter
• 6" OAL
• Front Drop Ledge: 2.45"
• Back Drop Ledge: 0.4 x .625" tall
• 3/8"-16 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112346-Turret Block, Doosan/Daewoo Lynx 220/240
112346-Turret Block, Doosan/Daewoo Lynx 220/240
• Doosan/Daewoo Lynx 220/240 CNC Lathe
• 1.5" Bore Diameter
• 4.5" OAL
• Front Drop Ledge: 2.45"
• Back Drop Ledge: 0.4 x .625" tall
• 3/8"-16 Threaded Holes on Top
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/(2) 3/8"-24 SHSS in Back
• Tool Release Jack Screw

Qty Add
112666-Turret Block, Doosan/Daewoo 700/800
112666-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 4" Bore Diameter
• 12" OAL
• Front Drop Ledge: 4.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
112667-Turret Block, Doosan/Daewoo 700/800
112667-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 100mm (3.937") Bore Diameter
• 12" OAL
• Front Drop Ledge: 4.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
112668-Turret Block, Doosan/Daewoo 700/800
112668-Turret Block, Doosan/Daewoo 700/800
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 3" Bore Diameter
• 12" OAL
• Front Drop Ledge: 4.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature
• Tool Release Jack Screw

Qty Add
112672-Turret Block Adapter Plate Doosan/Daewoo 700/800LM
112672-Turret Block Adapter Plate Doosan/Daewoo 700/800LM
• Doosan/Daewoo Puma 700/800LM CNC Lathe.
• Mates 112101-Turret Block T-Slot Style Tool Holder.

* Plate bolts to front of 112101 allowing use of (2) mounting bolts (not incl.) on turret surface

Qty Add
112726-Turret Block, Doosan/Daewoo 400LM
112726-Turret Block, Doosan/Daewoo 400LM
• Doosan/Daewoo Puma 400LM CNC Lathe
• 3" Bore Diameter
• 9" OAL
• Front Drop Ledge: 2.5"
• (3) 1/2-13 Threaded Holes on Top for Tool Orientation
• 1 Piece Split Design
• Thru Coolant Feature
• Tool Release Jack Screw

Qty Add
112727-Turret Block, Doosan/Daewoo 400LM
112727-Turret Block, Doosan/Daewoo 400LM
• Doosan/Daewoo Puma 400LM CNC Lathe
• 2.5" Bore Diameter
• 7.5" OAL
• Front Drop Ledge: 2.5"
• (3) 1/2-13 Threaded Holes on Top for Tool Orientation
• 1 Piece Split Design
• Thru Coolant Feature
• Tool Release Jack Screw

Qty Add
112728-Turret Block, Doosan/Daewoo 400LM
112728-Turret Block, Doosan/Daewoo 400LM
• Doosan/Daewoo Puma 400LM CNC Lathe
• 80mm (3.15") Bore Diameter
• 9" OAL
• Front Drop Ledge: 2.5"
• (3) 1/2-13 Threaded Holes on Top for Tool Orientation
• 1 Piece Split Design
• Thru Coolant Feature
• Tool Release Jack Screw

Qty Add
112729-Turret Block, Doosan/Daewoo 400LM
112729-Turret Block, Doosan/Daewoo 400LM
• Doosan/Daewoo Puma 400LM CNC Lathe
• 60mm (2.362") Bore Diameter
• 9" OAL
• Front Drop Ledge: 2.5"
• (3) 1/2-13 Threaded Holes on Top for Tool Orientation
• 1 Piece Split Design
• Thru Coolant Feature
• Tool Release Jack Screw

Qty Add
112925-Turret Block, Doosan/Daewoo 700/800LM
112925-Turret Block, Doosan/Daewoo 700/800LM
• Doosan/Daewoo Puma 700/800 CNC Lathe
• 4" Bore Diameter
• 12" OAL
• Front Drop Ledge: 4.5x.625" Tall
• Back Drop Ledge: 1.5x.625" Tall
• 1 Piece Split Design
• Thru Coolant Feature
• Turret Capture Feature w/25mm Locating Key
• Tool Release Jack Screw

Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>